Glowstick Twisters © 1984-2006
Fire Twisters © 1990-2006
Check out Glowstick Twister tips for some basic moves, or the twister videos to
see how they are manipulated around the hand and wrist.
These photos show the tools and what you need to do to make a set of Glowstick
or fire twisters. For the specifications for a glow stick, fire twister go to the relevant
page Fire Twisters / Glowstick Twisters. Place your cursor on a photo to see the
information on it.
Are you a Juggling artist or performer who uses Glowsticks, Glowstick Liquid Rave Dance, Twisters, Nunchaku, Poi, Spinning, Staff, Twirling, or Fire, and uses Dance Music with their Art and would like a link or a disabled artist who has an art or entertainment site that has Tips, Videos, Photos and would like a link. Click on Add your Link.
2 x 19 mm diameter tubing x 22 cm long
Drill a 12 mm hole 3 cm from end
Feed the cord in the end of the tube out one
of the holes around the tube then through
the other hole then out of the end
Tie the ends of the cord using a reef knot.
left over right then right over left. You
need to adjust the length of cord so the
two tubes are around 10.5 cm, Apart.
Secure the ends of the cord by wrapping
cotton around then tie the off the cotton.